Analyzer Groups

 

To Add an Analyzer Group:

  1. Open the Workbench and expand the Project Explorer and then the Internet of Things node.

  2. Right-click the Analyzer Groups node then click on Add Analyzer Group from the dropdown menu as shown below.

Adding an Analyzer Group from the Project Explorer

 

 

-OR-

 

Select the Analyzer Groups node in the Project Explorer then click on the Add Analyzer Group button, shown below, in the Edit section of the Home ribbon in the Workbench.

 

Add Analyzer Group Button

 

  1. This opens the Analyzer Group properties, shown below, which are comprised of an Assets tab and a Faults and Diagnostics tab. Enter a name for the new Analyzer Group in the Name text entry field.

Analyzer Group Properties

 

 

Assets Tab

Analyzer Group Properties - Assets Tab

 

 

Assets configured in this group

For assets configured in the Analyzer Group, multiple properties will be listed including Asset Path, Asset ID, Asset GUID, and Asset Path.

 

Faults and Diagnostics Tab

Analyzer Group Properties - Faults and Diagnostics Tab

 

 

Navigation Settings

Faults associated to the asset

 

This section will display properties of the faults that are associated to the selected asset, including Name, Description, Enabled, Severity, Rule Expression, Cost Expression (and Related Values (1-20) if the Show faults details checkbox is checked).

 

Diagnostic model associated to the asset

 

This section will display the diagnostic model, including Causes, of the diagnostic model associated to the asset.

  1. Once you have verified your settings, click on the Apply button and then the Close button to return to the Workbench.

See Also:

IoTWorX Configuration in Workbench

Publisher Connections

Custom Encoders/Decoders

MQTT Brokers

Collection Groups

Logger System Settings

Loggers

Publish Lists

Subscriber Connections

Nodes