IoTWorX Configuration in Workbench

Once your IoT device has been set up in the IoT Hub in your selected cloud service (e.g. Azure portal), you can then manage that device in the Workbench.

 

To Configure Your IoT Device in the Workbench

  1. Open the Workbench then click on the New Project button in the Project Tools section of the Project ribbon, then on the IoT Project Wizard selection, as shown below.

New IoT Project Wizard Selection from the New Project Button in the Project Tools Section of the Project Ribbon in Workbench

 

 

-OR-

 

Click on File in the top left of the Workbench and then on New IoT Project, as shown below.

 

New IoT Project Selection in the File Menu of the Workbench

  1. This opens the Create IoT project Wizard window, as shown below.

Create IoT project Wizard Window

 

 

Project Settings

 

Note: Once the form is submitted, the procedure will try to retrieve all the available IoT devices and the configuration for each one of them. This may take several seconds due to the publisher's settings.

 

Once you have completed your settings, click OK.

 

Create a new IoT Subscription

 

  1. Your added existing or new IoT subscriber connection(s) will make some changes to the Project Explorer in the Workbench. The new IoT Project(s) will appear. Double-click on an added IoT Project node in order to make any changes to its properties, shown below.

IoT Project Properties in the Workbench

 

 

General Settings

Click Apply to save your changes and Close to return to the Workbench.

 

 

See Also:

Internet of Things Node

Publisher Connections

Custom Encoders/Decoders

MQTT Brokers

Collection Groups

Analyzer Groups

Logger System Settings

Loggers

Publish Lists

Subscriber Connections

Nodes