ReportWorX64 Viewer

The ReportWorX64 Viewer control in GraphWorX64 provides the ability to configure selected reports for viewing in Runtime mode in a GraphWorX64 display.

 

To Use the ReportWorX64 Viewer:

  1. Within a GraphWorX64 display configuration, click on the Controls ribbon and then select the ReportWorX64 Viewer control. This activates the control with a "+", allowing you to draw a box within the display field to your preferred size/measurement. Once you release the mouse button, the control will populate with a report configuration form. The result will look similar to the image below.

Configuring the ReportWorX64 Viewer Control in GraphWorX64

  1. Once you have inserted the ReportWorX64 Viewer control, you can edit its properties by right-clicking on the box and selecting Object Properties.

ReportWorX64 Viewer Object Properties

The ReportWorX64 Viewer properties can be configured either through the Configuration window, shown below, or via the Properties section of the Workbench on the right side of the GraphWorX64 window.

Configuration Through the ReportWorX64 Viewer Configuration Window

General

ReportWorX64 Viewer Configuration Window - GENERAL Tab

 

DATA

COMMANDING

MISC

STYLE

ReportWorX64 Viewer Configuration Window - STYLE Tab

 

STYLE

NAVIGATOR STYLE

FONT

CHILD CONTROLS STYLE

TITLE

GRID HEADER

RUNTIME

ReportWorX64 Viewer Configuration Window - RUNTIME Tab

 

CONTEXT MENU

Viewer

[For Custom Command selection]

COMMANDS ON EVENTS

 

Note: The ReportWorX64 Viewer is one of many controls that now supports executing commands on events. These events vary per control, but for the ReportWorX64 Viewer they include:

To configure the command to be executed when this event occurs, go to Runtime tab. Find the Commands on Events section, check Enable Commands on Events, then configure the form below.

ReportWorX64 Viewer Object Properties

Common

Common-Style

Measurements

Misc

Misc-Commanding

Note: The ReportWorX64 Viewer is one of many controls that now supports executing commands on events. These events vary per control, but for the ReportWorX64 Viewer they include:

• Ready

• Started

 

To configure the command to be executed when this event occurs, go to Runtime tab. Find the Commands on Events section, check Enable Commands on Events, then configure the form below.

 

Text

3. After setting the Object Properties, the ReportWorX64 Viewer control can be saved when the containing GraphWorX64 display itself is saved.

ReportWorX64 Viewer Runtime

Putting a GraphWorX64 display containing a ReportWorX64 Viewer control into Runtime mode allows for additional options, as shown below.

 

The ReportWorX64 Viewer control can work in conjunction with the ReportWorX64 Navigator control within the same GraphWorX64 display. In the example below, the ReportWorX64 Navigator control can be seen in the right side of the display area.

 

ReportWorX64 Viewer in Runtime Mode in GraphWorX64

For listed generated reports, you can see information including Report Name, Executed By, Executed At and Status.

 

You can also download (then subsequently open) a selected report in multiple formats including Excel (.xlsx), HTML (html in zip file [.zip]), or PDF (.pdf).

 

See Also:

Controls