The GwxTimeDate type exposes the following members.

Properties

  NameDescription
Public propertyAccelerationRatio
The percentage of the animation's Duration spent accelerating the passage of time from zero to its maximum rate (range: 0.0 to 1.0).
(Inherited from GwxDynamic.)
Public propertyAnimateWhenTrue
Causes the animation to be active when the datasource comparison yields a result of "true" (after applying reverse compare logic if specified).
(Inherited from GwxDynamic.)
Public propertyAnimationMode
Indicates the animation behavior of this dynamic.
(Inherited from GwxDynamic.)
Public propertyAutoReverse
Causes the animation to automatically play in reverse after its forward iteration has finished.
(Inherited from GwxDynamic.)
Public propertyCanFreeze
Gets a value that indicates whether the object can be made unmodifiable.
(Inherited from Freezable.)
Public propertyComment
When this property is true, if Confirm is also true, this property indicates that the confirmation message will provide the user with field to enter a comment to be logged for the written value. This property is unused when the Confirm property is false.
(Inherited from GwxDynamic.)
Public propertyCommentRequired
When this property is true, if Confirm and Comment are also true, this property indicates that the user must enter a non-empty comment to be logged for the written value. This property is unused when either the Confirm or Comment properties are false.
(Inherited from GwxDynamic.)
Public propertyConfirm
When true, this property indicates that a warning message should be displayed prior to performing a data write that has been initiated via user interaction (the warning message allows the user to cancel the pending data write, or to proceed with the write). When false, the data write occurs without a confirmation message. This property is unused when the dynamic is not controllable.
(Inherited from GwxDynamic.)
Public propertyContinuousWrite
When true, this property indicates that the dynamic should continuously write new values while the user is interacting with the dynamic control (as in the case of dragging a slider). When false, this property indicates that the dynamic should only write a value when the user has finished interacting with the dynamic control (as in the case of releasing a slider after having dragged it to a new position).
(Inherited from GwxDynamic.)
Public propertyControl
When this property is true, this target object associated with this dynamic can be clicked on by the user to perform some action (i.e. slider, dial, button, dataentry). Usually, controllable objects are used to write data values.
(Inherited from GwxDynamic.)
Public propertyCustomConfirmMessage
A custom confirmation message.
(Inherited from GwxDynamic.)
Public propertyCustomData
A string field for custom data. The purpose of this field is defined by the user; it can be used to hold any extra configuration data in string format.
(Inherited from GwxDynamic.)
Public propertyCustomDateFormat
A user specified date format string consistent with the format used in Windows Control Panel for Regional Settings (for example, "M/d/yyyy" or "dddd, MMMM dd, yyyy") .
Public propertyCustomTimeFormat
A user specified time format string consistent with the format used in Windows Control Panel for Regional Settings (for example, "h:mm:ss") .
Public propertyDataComparison
Type of comparison for DataSource and Limit(s) (or zero).

For Discrete Animations - animation will activate when comparison is true.

For Analog Animation - animation will be skipped when comparison is false (if not specified, animation is always active).

For GwxProcessPoint - designates type of range validation for data entry.

(Inherited from GwxDynamic.)
Public propertyDataSource
The primary data connection for this dynamic object. Datasources can be an OPC tag, expression, constant value, or local variable.
(Inherited from GwxDynamic.)
Public propertyDateFormat
This property indicates what format to use for the date: a user specified custom format or the system defined current locale date format (short format or long format). If the user specifies a custom date format, that format is used even if the locale of the application is switched. If the current locale date format (long or short) is specified, and the locale of the application is switched, the date format will automatically change to that locale.
Public propertyDecelerationRatio
The percentage of the animation's Duration spent decelerating the passage of time from zero to its maximum rate (range: 0.0 to 1.0).
(Inherited from GwxDynamic.)
Public propertyDependencyObjectType
Gets the DependencyObjectType that wraps the CLR type of this instance. 
(Inherited from DependencyObject.)
Public propertyDescription
A user defined description string for this dynamic.
(Inherited from GwxDynamic.)
Public propertyDispatcher
Gets the Dispatcher this DispatcherObject is associated with.
(Inherited from DispatcherObject.)
Public propertyDragDropDataSource
Indicates that the DataSource of this dynamic can be drag/dropped during runtime into another component such as the Trend viewer.
(Inherited from GwxDynamic.)
Public propertyDuration
In general this property represents the time it takes for an animation to complete a cycle. This time is expressed in milliseconds.
(Inherited from GwxDynamic.)
Public propertyDynamicConnectionList
This list is used internally to compose a list of multiple dynamics to a single more complex/powerful dynamic object. A prime example of this is the GwxPickMenuItem dynamic configured to display a popup menu. In this case, the DynamicConnectionList is used to create a tree of child GwxPick objects, each representing a different command item on the menu. Other dynamics that use this list are GwxStateSelector, GwxRangeSelector, and GwxProcessPoint.
(Inherited from GwxDynamic.)
Public propertyDynamicStateWhenToggleOff
This property indicates that when this dynamic is not toggling, the alternate state of the dynamic (rather than the default state) should be used. For instance, if toggle (flash) is specified for a GwxHide dynamic, when this property is true, the associated static object will be hidden when not flashing (when this property is false, the object will be visible when not flashing).
(Inherited from GwxDynamic.)
Public propertyEnableControlEvents
True to enable execution of commmands when events occur.
(Inherited from GwxDynamic.)
Public propertyEnabled
When this property is false, the control behavior for this dynamic is disabled.
(Inherited from GwxDynamic.)
Public propertyEndPercent
Used to specify an ending magnitude for the animation (range: 0.0 to 1.0).
(Inherited from GwxDynamic.)
Public propertyFillBehavior
When the value is FillBehavior.Stop, this property indicates that the animated object returns to its default state when the animation's duration (including repeats) has expired. When the value is FillBehavior.HoldEnd, this property indicates that the animated object stays in its current state when the animation's duration has expired.

The default value is FillBehavior.HoldEnd. This property has no effect if the repeat count is infinite, or if there is no Duration.

(Inherited from GwxDynamic.)
Public propertyFreezeWhenNotAnimating
When false, this property indicates that the animated object returns to its default state when the animation is stopped. When true, this property indicates that the animated object stays in its current state when an animation is stopped.
(Inherited from GwxDynamic.)
Public propertyHighLimitSource
This property specifies a high limit for value used in the analog animation.
(Inherited from GwxDynamic.)
Public propertyInitialValue
Initial value to be written.
(Inherited from GwxDynamic.)
Public propertyIsFrozen
Gets a value that indicates whether the object is currently modifiable.
(Inherited from Freezable.)
Public propertyIsSealed
Gets a value that indicates whether this instance is currently sealed (read-only).
(Inherited from DependencyObject.)
Public propertyLowLimitSource
This property specifies a low limit for value used in the analog animation.
(Inherited from GwxDynamic.)
Public propertyMaximumLength
Indicates the maximum number of characters that can be displayed by this timedate. A value of zero (or a negative value) indicates that the application should determine the "best" maximum length.
Public propertyName
For internal use only. Not for customer use.

A unique user-friendly name that can be used to identify the object.

(Inherited from GwxDynamic.)
Public propertyPartitionMode
Indicates how to define the "partition" behavior of this analog dynamic. This feature is used to divide an analog range into a specified number of steps (useful for providing "tick" behavior in sliders, for example).
(Inherited from GwxDynamic.)
Public propertyPartitionOrigin
This property specifies the starting analog value from which subsequent steps are calculated. This value is only used when partitionmode="DeltaValue".
(Inherited from GwxDynamic.)
Public propertyPartitionValue
When partitionmode="NumberOfPartitions" this property specifies the number of steps to subdivide the analog value’s range into.

When partitionmode="DeltaValue" this property specifies an increment/decrement value between each step within the range.

(Inherited from GwxDynamic.)
Public propertyPeriodicToggleRate
If this property is specified, when the discrete state of the primary datasource would activate this dynamic, rather then simply activate the dynamic, the dynamic’s activation state will be periodically toggled on and off. This property represents the time interval between toggle state changes (i.e. for GwxHide and GwxColor dynamics, this represents the flash rate). This time is expressed in milliseconds.
(Inherited from GwxDynamic.)
Public propertyPicker
When true, this property indicates that an onscreen time/date picker should be used to enter a new value. When false, an in-place edit control will be used to type in the value. This property is unused when the dynamic is not controllable (i.e. a dataentry field).
Public propertyRepeatCount
This property causes a discrete state animation to run/repeat the specified number of times. If this value is less than zero, the animation repeats infinitely.
(Inherited from GwxDynamic.)
Public propertyResolveAliasesInDragDropDataSource
True to resolve global aliases in the DataSource before dropping the DataSource on another component. False to leave the global aliases unresolved (to be resolved by the component that receives the dropped DataSource). Default to use the document-level setting for ResolveAliasesInDragDropDataSources.
(Inherited from GwxDynamic.)
Public propertyReverseAnimateWhenFalse
Causes the animation to be active (in the reverse direction) when the datasource comparison yields a result of "false" (after applying reverse compare logic if specified).
(Inherited from GwxDynamic.)
Public propertySafeTouch
When true, this property indicates that the user must be touching a "safe zone" in order to use this control in runtime mode. This property only applies to "Touch" interaction - mouse and keyboard interactions are not affected by this property.
(Inherited from GwxDynamic.)
Public propertySeparator
A string used to separate the time and date when this dynamic is configured to display both the time and the date.
Public propertyShowDataSourceNameInToolTip
Determines whether or not to include the DataSource Name for this dynamic in tooltips.
(Inherited from GwxDynamic.)
Public propertyShowDataSourceValueInToolTip
Determines whether or not to include the DataSource Value for this dynamic in tooltips.
(Inherited from GwxDynamic.)
Public propertyShowDescriptionInToolTip
Determines whether or not to include the Description for this dynamic in tooltips.
(Inherited from GwxDynamic.)
Public propertyShowErrorInformationInToolTip
Determines whether or not to include the error information for this dynamic in tooltips.
(Inherited from GwxDynamic.)
Public propertyShowToolTip
Determines whether or not to include information for this dynamic in tooltips.
(Inherited from GwxDynamic.)
Public propertySkipInitialDuration
Indicates that the duration of a time-based dynamic will be skipped for the first data update.

This is useful, for example, for a time-based Hide dynamic that uses both AnimateWhenTrue and ReverseAnimateWhenFalse, to prevent an initial fade-out.

(Inherited from GwxDynamic.)
Public propertyStartDelay
This property represents a delay time before an activated animation will begin. This time is expressed in milliseconds.
(Inherited from GwxDynamic.)
Public propertyStartPercent
Used to specify a starting magnitude for the animation (range: 0.0 to 1.0).
(Inherited from GwxDynamic.)
Public propertyTimeDateKind
This property is used to designate whether to convert the date/time to/from local time vs. UTC time vs. no conversion.
Public propertyTimeDateMode
This property is used to designate whether to display the time only, the date only, the time followed by the date, or the date followed by the time.
Public propertyTimeFormat
This property indicates what format to use for the time: a user specified custom format or the system defined current locale time format. If the user specifies a custom time format, that format is used even if the locale of the application is switched. If the current locale time format is specified, and the locale of the application is switched, the time format will automatically change to that locale.
Public propertyUpdate
When true, this property indicates that the dynamic updates whenever the value of the associated DataSource changes. When false, this property indicates that the dynamic updates only when new values are written. Useful for sliders, dials, and data-entries.
(Inherited from GwxDynamic.)
Public propertyUseCustomConfirmMessage
True to specify a custom confirmation message.
(Inherited from GwxDynamic.)
Public propertyWriteInitialValue
Indicates that this dynamic will write an initial value after its datasource has been requested.
(Inherited from GwxDynamic.)

See Also