Channels

As shown in the figure in the GenBroker topic, the Channels tab in the GenBroker Configurator contains four channels:

• OPC direct

• OPC over TCP/IP direct

• OPC over SOAP/XML direct

• OPC over DCOM direct

Using this tab, you associate each node with the channel that GenBroker is to use for the node. You can add, remove, and reconfigure nodes and channels. You can define which nodes on the network will be accessed from the current node that uses the method of communication you have chosen. Multiple nodes can share a channel.

To add a node to a communication channel:

1. Click the Channels tab. Click a channel button on the top of the tab; the Select a Node dialog box appears (shown below).

Select a Node Dialog Box

2. Select the node name and/or IP address from the drop-down list. However, if the nodes are not currently connected to the computer you are using, you can type one in the Node Name or IP Address field.

3. Click the OK button. The node name appears in the navigation tree below the Channel node.

4. Add nodes until all of the nodes to be accessed from the current node are defined for the channel each will use.

See Also:

GenBroker

GenBroker Tag Syntax