Configuring HoloLens

1. Open GraphWorX64.

2. Create a new MobileHMI display.

3. From here, select the 3D View button on your ribbon and build a 3D display.
   Note: In HoloLens, one square within your grid is equivalent to 1 square meter.

4. Create a HoloLens Tile in MobileHMI.

5. Open HoloLens.

6. Install MobileHMI within HoloLens.

7. Once MobileHMI is installed and running, select your desired hologram.

8. Place that hologram within your environment.
   Note: If you position a hologram somewhere in your environment, you can turn off HoloLens and return to that location later, and your hologram will still be there.